Specifications

Product Number CQW-MR1000
Wireless specs
Support Format IEEE802.11b, IEEE802.11g, Draft 2.0 IEEE802.11n
Channel USA, Canada: 1-11 channel
Europe: 1-13 channel
Frequency IEEE802.11b: 2.4Ghz band
IEEE802.11g: 2.4Ghz band
Draft IEEE802.11n: 2.4Ghz band
Network Speed IEEE802.11b: 11, 5.5, 2, 1Mbps Auto
IEEE802.11g: 54, 48, 36, 24, 12, 9, 6Mbps Auto
Draft IEEE 802.11n: Max. 300Mbps
Transfer Mode IEEE802.11b: Direct sequence spread spectrum(DSSS)
IEEE802.11g: Orthogonal Frequency Division Multiplexing(OFDM)
Draft IEEE 802.11n: Orthogonal Frequency Division Multiplexing(OFDM)
Antenna Detachable Dipole Antenna(RP-SMA 3dBi*3pcs 3T3R)
Access Mode Infrastructure Mode
Security WEP (64/128bit)
WPA/WPA2 (Encryption Protocols: TKIP/AES, Authentication method: PSK/IEEE802.1X)
Support RADIUS
Hidden SSID (Enable/Disable)
MAC Address Filtering/ max.20 entry
Easy Wireless Setup WPS
WDS WDS Bridge, WDS Repeater
LAN Specs
Support Format IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX)
Interface RJ-45 port x 5 (Internet x 1, LAN x 4 , Auto MDI/MDI-X support)
Transfer Speed 10/100Mbps (Auto Negotiation)
Network Cable

10BASE-T: Category 3 or above
100BASE-TX: Category 5 or above

Router Specs
Supported Internet Service FTTH, ADSL, VDSL, CATV
WAN Setup Mode Obtain an IP address automatically (DHCP client)
Fixed IP address
PPPoE client setup
PPPoE multi session (Supported only in Japan)
Unnumbered PPPoE
MTU setting
LAN Setup Mode Fixed IP address
DHCP server (Enable/disable)
Routing Function Static routing
Address Conversion NAPT (IP masquerading)
Local server function Port forwarding, DMZ
UPnP Follow UPnP Forum Internet Gateway Device v1.0
Dynamic DNS DynDNS, CyberGate - DDNS -, others
Hardware specs
Hardware Switch WPS button, Reset button, Router/AP switch button
LED POWER, AP, Router, WAN×1, LAN×4, USB, WLAN, STATUS
Power Input: AC100V, 50/60Hz, Output: DC5V, 3A
Outside Dimension 34 (W) ×191 (H) ×161 (D) mm (excludes apophysis part)
Weight 420g (Main unit only)
Operation Environment Temp.: 10 to 40°C
Humid: 35 to 85% (no condensation)
USB Function
USB port USB2.0 ×1 (TypeA)
USB Function 3G Mobile phone dial-up function
Others
Log function System log
NTP function

Timezone setting, NTP Server settng × 2

Administrative function

Remote management

Supported OS

Windows Vista/XP/2000/Me/98SE, MacOSX 10.3/10.4/10.5


- NOTE

* If you use a browser other than fully supported browser Internet Explorer 7.0, you might not be able to setup your router correctly.
* In order to use WPA/WPA2, the connected wireless devices have to support WPA or WPA2.
* In order to use WPS, the connected wireless devices have to support WPS.
* The initial wireless channel width is 20Mhz. When you use 40Mhz(a theoretical figure 150Mbps), change the mode to 20/40Mhz on the web set up screen.
* The numeric number shown here is a theoretical maximum number and not a actual number.
* WDS bridge function is supported only identical devices.
* These specs will be changed without notice.
Please be forwarned and refer to our home page at (http://www.planex.net) for the latest information.

(C)Copyright 2008 PLANEX COMMUNICATIONS Inc. All rights reserved