Before setting up or connecting this product, you need to check the IP address of the broadband router.
Note the IP address on the memo.
*If you don't know how to check it, refer to the manual of broadband router.

* For example, when the IP address of broadband router is "192.168.1.1", the IP address of this product will be "192.168.1.250", however, when there are other network devices which have "192.168.1.250" on the same LAN, change the number of "250" to other number.

When the 3rd number of the IP address is other than "1" such as "192.168.0.xx" on this broadband router, it is necessary to change the initial setting of the DHCP server on this product. After making connection with the PC in "STEP3. Connect to PC for set up , change the IP address for LAN side in "DHCP server" setting item in step in STEP4. Set up the IP address of this product , then change the block [ 3rd ] number into the same number as the broadband router in use from the head of a "start address" and an "end address" further.

- Example -
When IP address of the broadband router is "192.168.0.1"
(DHCP server setting screen of this product as follows)

*When the IP address of the broadband router in use of the example above is "192.168.0.1"The numbers in the 3rd brock vary depending on using broadband router.

"STEP2. Prepare the computer for set up"