STEP1. Check the network in use > STEP2. Prepare the computer for set up > STEP3. Connect to PC for set up > STEP4. Set up the IP address of this product > STEP5. Connect the device
STEP3. Connect to PC for set up
- Prepare the following before the connection:

1. A PC for set up
2. LAN cable

When useing this product with a wireless LAN, the set up has to be done with wired LAN.

Shift the changeover switch to the "AP" side (access point mode).

Connect the LAN port of this product (any of 1 to 4) and the LAN port of the PC.

Connect the AC adapter to the this product's power connector.

Connect the AC adapter to the power out let and confirm the Power LED light is on.

Turn on the power of the PC.

"STEP4. Set up the IP address of this product"
(C) Copyright 2008 PLANEX COMMUNICATIONS Inc. All right reserved