Start up WEB browser.

▼
Web browser will start.

Enter IP address [192.168.1.250] and press <Enter> key.

▼

Login window is displayed.

(1)Enter "admin" in "User name" with caps lock off.
(2)Enter "password" in "Password" with caps lock off.
(3)Click [OK].

▼
Top page of set up window is displayed.

Click "Network" → "LAN Setup"

(1)Enter "New IP address of CQW-MR1000" in "STEP1. Check the network in use" in "IP Address".
(2)Remove the check of "DHCP Server".
(3)Click [Apply].
*In future when opening the setup window of this product, enter the IP address set up here in .

▼
Setting is reflected.

Close the window.

When the 3rd number of the IP address which was set up in the above procedure (1) in is except "1" as "192.168.0.250", it is necessary to change the "Start Address" and "End Address".
For example, when the set-up IP address is "192.168.0.250", please set the "Start Address" and "End Address" as "192.168.0.20"- "192.168.0.50" according to the 3rd number.

- For example -
When the address of the router in use is "192.168.0.1":

*The above-mentioned example is when the last IP address of the broadband roter is "192.168.0.1".The third number from the head differs depending upon the router in use.

"STEP5. Connect the device"