STEP1. Connecting this product > STEP2. Set up network > STEP3. Setup of this product > STEP4. Confirm the connection
STEP3. Setup of this product
The connection setting method from a 3G USB modem to the Internet.
1

Start WEB browser.



▼
WEB browser starts.
2

Enter the IP address "192.168.1.1" into the address column, and press <Enter> key.


▼

"Connect with 192.168.1.1" is displayed.
3

(1)Enter "admin" into "User name" with the caps lock off.
(2)Enter "password" into "Password" with the caps lock off.
(3)Click [OK].

▼
Displays "CQW-MR1000 setting top page".
4

Click "Setup Wizard".
5

Click [Skip].
6

Choose "PPP USB"and click [Next].
7

Set up.

(1)At "Connection Method", select "Specified Connection".
*"Standard Connection" is selectable, but it is out ouf support.

(2)Enter the following:
Telephone Number Enter the accesspoint "Phone number".
USER ID Enter the Login ID given by the provider.
Password Enter the password given by the provider.
Confirm Password Enter the same password again for confirming.

(3)Click "Finish".

▼
Display the message and the countdown starts.
11

The setting is completed when the countdown ends and the top page is displayed.
Close the WEB browser.


Setup is complete. This product is automatically connected after the reboot.
back next
(C) Copyright 2006 PLANEX COMMUNICATIONS Inc. All right reserved