How to confirm the wireless LAN security at the factory default

The following wireless LAN security is set to this product at the factory default.
When setting up the wireless LAN client connected to this product, set up the client confirming a setup in the following table.

*1: The WEP key and the passphrase of WPA/WPA2 vary depending on the product. For confirming method, refer to the following "How to confirm the WEP key and the WPA passphrase".
*2: SSID set to Access Point 3 vary depending on the product. For confirming method, refer to the following "How to confirm SSID set to Access Point 3".

- How to confirm the WEP key and the WPA passphrase

Confirm and take a note of "Node ID[LAN]: "12 figures of alphanumeric characters written on the bottom of this product. Noted alphanumeric which took the first two words of a ten-digit number is the factory default WEP key or the WPA passphrase. In addition, when setting WPA passphrase to a client, make all contained alphabets into a small letter, and input them.
*The alphanumeric vary depending on the product.

Confirm and take a note of "Node ID[LAN]: 0090CCxxxxxx" (12 figures of alphanumeric characters / xxxxxx vary depending on the product) written on the bottom of this product. "90CCxxxxxx" which took the head of 2 characters of the written numerical value serves as the WEP key or a WPA passphrase. In addition, when setting the WPA passphrase to a client, please make into a small letter all the alphabet contained in "CCxxxxxx" of "90CCxxxxxx", and enter them.

- How to confirm SSID set to Access Point 3

Confirm "Node ID [LAN]" (alphanumeric/12 digit) written on the label on the bottom etc. of this product. Numeric numbers taken a note is the "SSID".
*The alphanumeric vary depending on the product.

Confirm and take a note of "Node ID[LAN]: 0090CCxxxxxx" (12 figures of alphanumeric characters / xxxxxx vary depending on the product) written on the bottom of this product. Written "0090CCxxxxxx" of the numerical value is set to SSID.