TOP page

Easy set up for wireless LAN with button (WPS setup)

You can set up wireless LAN easily by using the WPS button on the main unit.
However, in order to set up with WPS function, Both wireless LAN router (main unit) and the wireless LAN adapter (client) need to be WPS supported.
If the wireless LAN adapter(client) is not WPS supported, please complete the setting from "Wireless LAN setup with a setup window (Usual settings)" at the setting window.

*WPS (Wi-Fi Protected Setup)is a wireless LAN easy set up protocol defined by "Wi-Fi Alliance" that is an organization of wireless LAN associated. This is the function which enables you to set up a wireless LAN connection or make an encryption with WPS compliant products If the wireless LAN adaptor (client) is not WPS supported, please set the wireless LAN at the setup window.

There are two ways to set up as below. Please refer to the setup method in response to your wireless LAN adapter.

- The setup for Wireless LAN adapter with WPS button

- The setup for wireless LAN adapter without WPS button

* Please refer to here When you make a WPS connection on the converter mode.


- The setup for Wireless LAN adapter with WPS button

Here is a setup guide for GW-USMicroN.


Before starting the setup, please complete the following procedures in advance.
  • Finish the setup described in "Quick Installation Guide" or in "Internet connection" in this user's manual in the supplied CD-ROM, and get ready for connection Internet for this product.
  • Install the wireless LAN adapter into the PC.

Prepare this product and PC built-in wireless LAN adapter that supports WPS, and make sure that the power is on.


The WPS function is set as "Enable" on an initial setting.
Please move on to when the setup after purchasing.
When set it as "Disable", please refer to here and move on to the following procedures after making the WPS function "Enable".

 

Please hold the WPS button of the back until the WPS lamp on the front starts flashing. (more than 2 seconds)


Please finish the next steps in the next two minutes.

 
Hold WPS button of GW-USMicroN for more than 2 seconds.
*Position of the WPS button differs depending on the wireless LAN adapter.

Please wait for around 30 seconds to 3 minutes, without any operation.

 
Double click the WEB browser and confirm the Internet connection.


 


- The setup for wireless LAN adapter without WPS button

The setup guide for GW-USMicroN.


Before starting the setup, Complete the followings in advance:
  • Finish the setup described in "Quick Installation Guide" or in "Internet connection" in this user's manual in the supplied CD-ROM, and get ready for connection Internet for this product.
  • Install the wireless LAN adapter into the PC.

1 Prepare this product and the PC with a wireless adapter supporting WPS, and make sure that the power is on.


The WPS function is set as "Enable" on the initial setting.
Please move on to when the setup after purchasing.
When set as "Disable", please move on to the following procedures here after making the WPS function "Enable".

 
1 Start up Wireless LAN adapter utility
*For starting up the utility, refer to "Quick Installation Guide" of wireless adapter or user's manula in CD-ROM.
*In case of using other manufacturer's adapter, follow the manual attached in the product.

 
Please hold the WPS button on the back (more than 2 seconds) until the WPS lamp on the front starts flashing.


Please finish the next steps in the next two minutes.
 
1

Double click the utility icon in the system tray
*Please perform the above-mentioned operation within 2 minutes after starting to blink a WPS lamp.
*The following is the set up screen of GW-USMicroN In case of using other manufacturer's product, refer to the product's manual attached with the product.



start up the utility

 
1 Click "WPS" from the top menu.
 
1

Click [PBC].


The utility will start searching the destination connection.

 
1 Confirm the message of "PBC-Get WPS profile successfully."
 
1 This completes the WPS set up. Please confirm that it can be connected to the Internet.


  • Security set up (such as encryption ) will be done by WPS function.

If you wish to connect to second or later computer, follow the same procedure above.

 
  Back to the Menu  
 
(C)Copyright 2006 PLANEX COMMUNICATIONS Inc. All rights reserved