TOPページ

STEP4 Set up the internet connection

Set up by using automatic detecting function of internet connection
*Ready documents you have contracted for the internet connection (information required for the connection such as internet service provider) in hand.

 

●Click below when you set up from computer
  →Set up from computer

●Click below when you set up from iPhone.
  →Set up from iPhone

 


 
■Set up from computer

Start WEB browser.


Enter "mf.setup" as IP address in the address bar, then press the <Enter> key.


If "Connect to mf.setup" or "Top page of set up screen" does not appear or if you are transferred to the search result WEB page, please refer here.

 

(1)Enter "admin" in "User Name" in half-width characters.
(2)Enter a password to "Password", in half-width alphabets and numbers.
(3)Click [OK].

 

Top page of setting screen is displayed.
Click "Setup Wizard".


Automatically detect the internet connection of this product.
*It will take 1 to 2 minutes until getting the result.
*The result will be different depending on the contract or connection type of the internet service provider which you are using.
 

●Detect as "Connected to the DHCP server"
   →Click "Next", proceed to "DHCP connection"

 

 

●Detect as "It is PPPoE connection"
   → Click "Next", proceed to "PPPoE connection"
 

 

●Diagnose as "The cable is not connected".
 



Please check the following points, and proceed set up wizard.
・If this product and modem are connected firmly by LAN cable or not.
・If the modem turned on



Set up the internet connection.

■When it is DHCP connection

(1)Make sure WAN connection type is set as "DHCP Client ".
(2)Click [Next].

 

 

(1)Make sure IP address and subnet mask are entered.
(2)Click [Next].

 

 

Go to "Wireless LAN Setting".

   

■When it is PPPoE connection

(1)Make sure WAN connection type is set as "PPPoE".
(2)Enter the user name assigned by the internet service provider.
(3)Enter password which was assigned by your internet service provider.
(4)Make sure Flets Square is set as "No Use ".
(5)Click [Next].

 



*The user name is described as "Log in name" or "Connecting user name" or "User ID" depending on the provider.
*Please be careful about upper case and lower case, and enter in half-width alphabets and numbers.

 

(1)Make sure IP address and subnet mask are entered.
(2)Click [Next].

 

 

Go to "Wireless LAN Setting".

   

 

Standard setting screen of Wireless LAN appears.
(1)Make sure "ap-game-XXXXXX" is displayed in SSID column.
   *Each product has different code on "XXXXXX"
(2)Click [Next].

 

Configure wireless LAN security.

(1)Encryption: "WEP".
(2)Key Length: Select "64bit"
(3)Key Format: Select "Hex".
(4)Key Setting: Enter 10 digits encryption key in half-width alphabets and numbers.
(5)Click [Finish].


*The number of characters which can be entered for key setting is only 16 characters from 0 to 9 and a to f.
*Please enter in half-width alphabets and numbers for key setting.
*Encryption key set up here is used upon connecting game machines.

 

A message "Change setting successfully " appears, then this product will restart.

 

Close WEB browser.

 

 

Here the set up is completed.


Please refer to "Wireless LAN connection" continuously, and connect the wireless LAN to this product.

*You don't need to proceed the setting again if you used same computer at previous setting process.
Start WEB browser and check the internet is connected.



 

Push the home button on iPhone, then tap "Safari".


Touch address bar on Safari, and delete all letters displayed.

 

(1)Enter "mf.setup" in address bar
(2)Touch "Go".



If "Connect to mf.setup" or "Top page of set up screen" does not appear or if you are transferred to the search result WEB page, please refer here.

 

(1)Enter "admin" in the name.
(2)Enter password in "Password".
(3)Tap "return".

 

Top page of setting screen is displayed.
Tap "Setup Wizard".


Automatically detect the internet connection of this product.
*It will take 1 to 2 minutes until getting the result.
*The result will be different depending on the contract or connection type of the internet service provider which you are using.
 

●Resulted as "Connected to the DHCP server"
→ Tap "Next"、and go to "DHCP connection"

 

 

●Detect "It is PPPoE connection"
→ Tap "Next"、and go to "PPPoE connection"
 

 

●Diagnose as "The cable is not connected".
 



Please check the following points, and proceed set up wizard.
・If this product and modem are connected firmly by LAN cable or not.
・If the modem turned on



Set up the internet connection.

■When connecting to DHCP

(1)Make sure WAN connection type is set as "DHCP Client ".
(2)Click [Next].

 

 

(1)Make sure IP address and subnet mask are entered.
(2)Click [Next].

 

 

Go to "Wireless LAN Setting".

   

■When connecting to PPPoE

(1)Make sure WAN connection type is set as "PPPoE".
(2)Enter the user name assigned by the internet service provider.
(3)Enter password which was assigned by your internet service provider.
(4)Make sure Flets Square is set as "No Use ".
(5)Click [Next].

 



*The user name is described as "Log in name" or "Connecting user name" or "User ID" depending on the provider.
*Please be careful about upper case and lower case, and enter in half-width alphabets and numbers.

 

(1)Make sure IP address and subnet mask are entered.
(2)Click [Next].

 

 

Go to "Wireless LAN Setting".

   

 

Standard setting screen of Wireless LAN appears.
(1)Make sure "ap-game-XXXXXX" is displayed in SSID column.
   *Each product has different code on "XXXXXX"
(2)Click [Next].

 

Configure wireless LAN security.

(1)Select Encryption Scheme: "WEP".
(2)Key Length: Select "64bit"
(3)Key format: Select "Hex".
(4)Key Setting: Enter 10 digits encryption key in half-width alphabets and numbers.
(5)Click [Finish].


*The number of characters which can be entered for key setting is only 16 characters from 0 to 9 and a to f.
*Please enter in half-width alphabets and numbers for key setting.
*Encryption key set up here is used upon connecting game machines.

 

A message "Change setting successfully" appears, then this product will restart.

 

Close Safari.

 

 

Here the set up is completed.


Please refer to "Wireless LAN connection" continuously, and connect the wireless LAN to this product.

 

戻る
メニューへ戻る
 
(C)Copyright PLANEX COMMUNICATIONS Inc. All rights reserved