| GN-1200TW3 |
|
| 10/100/1000Mbps PCI Gigabit Ethernet Adapter |
| GN-1200TW3 Gigabit Network Adapter is a high performance 10 Base-T, 100Base-TX, and 1000Base-T network adapter with Windows Plug and play for PCI local bus computers. |
|
|
- 32-bit PCI v2.2 and ACPI Rev. 1.0 compliant
- Plug and play compatible for easy installation and configuration
- Supports 10/100/1000Mbps operation
- Supports Wake-On-LAN (WOL) function and remote wake-up
- Compliant with IEEE 802.3ab
- Supports IEEE 802.1Q VLAN
- Supports IEEE 802.3x Full Duplex flow control
- Supports crossover detection & auto-correction
- Support Jumbo Frame (up to 7KB)
- Supports IEEE 802.1Q VLAN tagging
- Power saving supported when power down or link down
- Transmit/Receive FIFO (8K/64K) supported
- Supports Microsoft NDIS5 Checksum offload (IP,TCP,UDP) and large-send offload
|
|
 |
| Model |
GN-1200TW3 |
| Interface |
PCI specification 2.2 compliant |
| Standard Complies |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE802.3x flow control
IEEE802.1Q VLAN |
| Supported Media |
UTP/STP cables
10Mbps: Category 3 or greater
100Mbps: Category 5 or greater
100Mbps: Category 5 greater or Category 6 |
| Port Configuration |
-1 port RJ-45 for 10/100/1000BASE-T
-Auto MDI/MDI-X
-Auto-Negotiation: speed, duplex mode, flow control |
| Transmission Rate |
LAN interface (Half/Full Duplex):
-10Mbps/20Mbps
-100Mbps/200Mbps
-2000Mbps (Full Duplex) |
| Supported OS |
Windows 98SE/ME/2000/XP(32/64bits)/Vista(32/64bits),
Mac OS 10.4/10.5 on intel-bsaed
Linux 2.4/2.6 |
| Power Consumption |
3W (Max.) |
| Operating temperature |
0°C to 40°C |
| Operating Humidity |
5% to 95% relative, non-condensing |
| Dimension (W x D x H) |
45 x 119 x 16 mm |
| Weight |
50g |
| EMI Certification |
CE, FCC part 15 Class B |
| LED |
Link/Act., Speed |
|
|
|
Location : 
