|
 |
Supports 24 10/100BASE-T/TX, and 2 Gigabit combo ports with RJ-45 connectors or and associated Mini-GBIC slots. |
| |
|
Supports half and full duplex mode 10/ 100M bps speed for all ports . |
| |
|
Supports full duplex mode on port 25 and 26 when work in the Gigabit speed. |
| |
|
The stacking interfaces on the front panel support up to 8 units of SF-0224FS via RJ45 cables. |
| |
|
Supports auto MDI/MDIX on all 10Base-T10/100Base-TX ports |
| |
|
Supports up to 8K MAC address entries |
| |
|
Supports 4Mb for packet buffer size |
| |
|
Provides flow control mechanism: backpressure for half duplex; IEEE802.3x for full duplex operation. |
| |
|
Provides store-and-forward forwarding scheme |
| |
|
Provides HOL (Head of Line) blocking prevention |
| |
|
Supports port mirroring |
| |
|
Provides Link Aggregation |
| |
- Up to 8 ports in one trunk
- Up to 4 trunk groups
- Supports trunks across switches
- Supports 802.3ad (LACP)
- Supports Cisco Ether-channel (static truck)
- Support Load Balance for both Unicast and Multicast traffics
|
| |
|
Supports VLAN |
| |
- Supports IEEE 802.1Q tagging VLAN,
- Port-based VLAN
- Up to 255 active VLANs
- GVRP protocol for automatic VLAN registration and dynamic VLAN management.
- 802.1v Protocol-Based VLAN (Phase 2)
- Private VLAN
|
| |
|
Supports IGMP (v1/v2) Snooping and Query function |
| |
|
Supports Broadcast Storm control. |
| |
|
Supports Spanning Tree protocol |
| |
- Supports IEEE 802.1D Spanning Tree protocol
- Supports IEEE 802.1w Rapid Spanning Tree
- Supports IEEE802.1s Per VLAN Spanning Tree (Phase 2)
- Support Proprietary per port based Fast Forwarding mode
|
| |
|
Quality of Service |
| |
- Supports L2/L3/L4Traffic Classification/Priority Management
- Supports CoS by IEEE 802.1p 4 priority queues control
- Traffic Classification/Priority Management based on IP Precedence/TOS
- Traffic Classification/Priority Management based on TCP/UDP/UDP port number
- Supports WRR for priority queues
- Strict scheduling for priority queue
- Rate Limiting
- Supports DiffServ (Phase 2)
- Support Random Early Detection (RED)
|
| |
|
Security |
| |
- Supports dual Operation Codes
- Supports L3 and L4-awared prioritization
- RADIUS (Authentication)
- TACACS+
- SSL
- SSH (v1.5)
- SSH (v2.0) (Phase 2)
- Access Control
- Supports IEEE 802.1x port based security
- Supports against Distributed Denial-of-Service Attacks
|
| |
|
Management |
| |
- Supports SNMP v1 and SNMP v 2c management functions.
- Supports RMON (groups 1,2,3 and 9).
- Supports Web-based management.
- Supports TELNET console interface.
- Supports BOOTP and DHCP for IP address assignment.
- Supports firmware upgraded by TFTP file transfer protocol through the Ethernet network.
- Supports Firmware image upgrade by TFTP protocol.
- Supports dual Firmware images
- Supports Configuration file upload/download by TFTP protocol
- Supports two or more Configuration files
- HP Open View (Windows)
- SNMP access IP filtering configuration MAC based port security
- Provides 1 Male DB9 RS -232C console interface configured as DTE for operation, diagnostics, status, and configuration information.
- Provides Command Line Interface from the console port using a VT-100 terminal
|
| |
|
Stacking Features |
| |
- Hot insertion and removal of stacking units
- Close Loop Stacking
- VLAN Membership across the stack
- Single IP address for management
- Trunking across the stack
- Packet Priority across the stack
|
Location : 
