Location : Home > Products > Switches > SF-0408MGL SF-0408MGL 12 1000BASE-X (SFP) ports + 4 gigabit combo ports(RJ45/SFP) L3 Intelligent Switch   Features Product View Specification Downloads   Switching Features Provides 8 10/100/1000BASE-X (SFP) and 4 gigabit combo ports (RJ45/SFP). Provides Redundant Power Supply (RPS) connectivity The 10/100/1000BASE-TX ports support auto-sensing, auto-negotiation. Supports Jumbo frame up to 9KB Provides wire speed L2/3 switch Supports up to 1MB of packet buffer. Supports up to 16K MAC address entries Supports up to 1024 static MAC entries Flow Control supported Provides IEEE 802.3x for full duplex mode Back pressure flow control for half duplex mode Provides HOL (Head of Line) blocking prevention Provides store-and-forward forwarding scheme Provides Broadcast storm protection VLANs support : Supports IEEE 802.3ac frame extension for VLAN tagging Supports IEEE 802.1Q VLAN (255 VLAN entries) Supports up to 4K VLAN ID Supports Port-based VLAN Private VLAN Supports Protocol-Based VLAN (IEEE 802.1v) Number of protocol VLAN entries is 7 per port Supports 3 default protocol types as following: IP ARP RARP Supports GVRP protocol for dynamic VLAN management (up to 255 VLAN entries) Supports IGMP snooping and query function Spanning Tree : Provides Spanning Tree (IEEE 802.1D) Fast forwarding mode supported (Proprietary mechanism) IEEE 802.1w, Rapid Reconfiguration Spanning Tree IEEE 802.1s per VLAN per Spanning Tree supported (up to 32 instances) Provides Link Aggregation Up to 6 trunk links Up to 8 ports per trunk link Complies to IEEE 802.3ad Cisco EtherChannel compatible Routing Features Provides IPv4 routing at wire speed Provides up to 4K IP address entries Provides Static IP routes (256 entries) Provides Multi-netting Provides Supernetting (CIDR) Provides RIP I (RFC1058) and RIP II (RFC2453) routing Provides OSPF (RFC2328) routing Provides IP Multicast Routing IGMP v2 DVMRP v3 PIM - Dense Mode IP Redundancy - VRRP (RFC 2338) supported ARP (RFC 826) (2048 entires) Provides DHCP/BOOTP (RFC 951) relay Provides DHCP server (RFC 2131)/client Quality of Service Features Provides DiffServ Traffic classification and priority management based on the following parameters: IEEE 802.1p (COS) IP Precedence (TOS) DSCP Source/destination MAC address Source/destination IP address TCP/UDP port number Per port bandwidth management, minimum bandwidth 8Mbps and each increment is 8Mbps Provides 8-level priority in switching (IEEE 802.1p) Priority queue scheduling scheme: Weighted Round Robin (WRR) Strict Priority Security Feature Set User/Password protected system management terminal Port Security - MAC address filter L2/L3/L4 access control list Up to 128 rules Base on : MAC IP IP filtering on management interface RADIUS TACACS+ Secure Shell (SSH v2/Secre Telnet) HTTPS/SSL  IEEE 802.1x Port-Based Management Features Provides 1 Male DB9 RS -232C console interface configured as DTE for operation, diagnostics, status, and configuration information. Supports Cisco-liked Command Line Interface (CLI) for local console or remote telnet management using VT-100 style terminal, 4 sessions Supports Telnet management Supports Embedded Web-based Management Supports software upgrade/download via TFTP Supports configuration download/upload via TFTP Supports port mirroring Supports BOOTP/DHCP client for IP address assignment DNS server (proxy) supported Support ARP Proxy Supports Remote Ping Supports dual copies of code Supports dual copies of configuration Supports System/Crash/Error log Supports SNMPv1/v 2c Supports RFC 2819 RMON group (1,2,3 & 9) Support SNTP Support SMTP Supports MIBs RFC 1212, RFC1213 standard MIB-II RFC 1215 Trap RFC 1493 Bridge MIB RFC 1643 Ether-like MIB RFC 1724 RIP II MIB RFC 1757 RMON MIB RFC 1907 SNMP v2 RFC 1850 OSPF II MIB RFC 2011 IP MIB RFC 2012 UDP MIB RFC 2013 TCP MIB RFC 2096 Forwarding Table MIB RFC 2233 Interface Group MIB RFC 2571 SNMP framework MIB RFC 2572 SNMP-MPD MIB RFC 2573 SNMP Target MIB, SNMP Notification MIB RFC 2574 SNMP User-Based SM MIB RFC 2575 SNMP View Based ACM MIB RFC 2576 SNMP Community MIB RFC 2621 RADIUS Client MIB RFC 2668 MAU MIB RFC 2665 Ether-like MIB RFC 2674 Bridge MIB Extensions (IEEE802.1Q MIB) RFC 2737 Entity MIB RFC 2742 Extensible SNMP Agents MIB RFC 2787 VRRP MIB RFC 2863 Interface Grop MIB IP Multicast MIB RFC 2933 IGMP MIB RFC 2934 PIM MIB DVMRP MIB IEEE 802.1w Rapid Reconfiguration Spanning Tree MIB IEEE 802.3ad Link Aggregation MIB Private MIB Supports Traps : RFC1215 Trap RFC 1493 Trap RFC 2819 RMON Groups (1, 2, 3 and 9) Traps Option Module       MGBIC-SX-P   MGBIC-LX-P 1000BASE-SX(LC Connector) Mini GBIC Module   1000BASE-LX(LC Connector) Mini GBIC Module Model SF-0408MGL Access Method 10/100/1000Mbps ( CSMA/CD ) Supported Standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX and 100BASE-FX IEEE 802.3z 1000BASE-SX IEEE 802.3x flow control support IEEE 802.1D (Bridging), 1993 IEEE 802.1Q (Virtual LAN) 1998 IEEE 802.3ad (LACP) IEEE 802.1s IEEE 802.1w Supported Media UTP/STP Cable 10Mbps :Category 3 or greater 100Mbps :Category 5 or greater 1000Mbps :Enhanced Category 5 or greater Port Configuration 1000Base-X SFP ports × 8 4 Giga combo port-RJ45/ SFP × 4 1 RS232 port × 1 1 Redundant Power (DC) connector × 1 Data Transfer mode Store-and-forward Filtering/Forwarding Rate For each port, 10M :14,881pps 100M :148,810pps 1000M :1,488,100pps Management Provides 1 Male DB9 RS -232C console interface configured as DTE Supports Cisco-liked Command Line Interface (CLI) using VT-100 style terminal, 4 sessions Supports Telnet management Supports Embedded Web-based Management Supports software upgrade/download via XMODEM or TFTP Supports configuration download/upload via TFTP Support Port Mirroiring Supports BOOTP/DHCP client for IP address assignment Support ARP Proxy Supports Remote Ping Supports dual copies of code Supports multiple copies of configuration Supports System/Crash/Error log Supports SNTP (RFC 2030) Supports SNMPv1/v 2c /v3* Supports RFC 2819 RMON group (1,2,3 & 9) Supports MIBs Flow Control Full Duplex: IEEE802.3X Half Duplex: Back Pressure Security Features User/Password protected system management terminal L2/L3/L4 access control list RADIUS TACACS+ Secure Shell (SSH/Secure Telnet) HTTPS/SSL EEE 802.1x IP Multicast Support IGMP snooping Jumbo frame Supports Jumbo frame up to 9KB MAC Address 16,000 entries Buffer Memory 4 MB Internal Bus Speed 24 Gbps VLAN IEEE802.1Q Tagging VLAN ( up to 255 groups ) Trunk Supports 8-port, ( up to 6 groups ) QoS IEEE802.1p ( 8 levels ) Port Mirroring Supported MAC address filtering Supported ACL (Access Control List) Supported Power Supply Nominal Input Voltages: 110V & 230V Input Voltage Range : 90-240V RMS Input Frequency: 50/60Hz Maximum i/p current: 1.2A /110V, 0.6A /230V Redundant Power Supported Operating Temperature 0 to 50 °C Operating Humidity 5% to 95% (Non-condensing) Storage temperature -40 to 70 °C Dimension (H x W x D): 4.4cm x 44cm x 23cm Weight 4.36kg 19" rack-mounting Supported EMI FCC Class A, CE Mark , VCCI Package Contents - Stackable Fast Ethernet Switch (SF-0408MGL) - Four adhesive foot pads - Bracket Mounting Kit containing two brackets and eight screws for attaching the brackets to the switch - Power Cord - RS-232 console cable - This Installation Guide - Management Guide
	| Site Map | Terms of Use | Privacy | Contact Us |