Location : Home > Products > Switches > SF-4024FL SF-4024FL SF-4024FL Layer 3 Standalone Routing Switch   Features Product View Specification Downloads   Switching Features Provides 24 10/100BASE-T plus 2 gigabit SFP ports plus 2 10/100/1000Base-T ports (RJ45) on the front panel Provides Redundant Power Supply (RPS) connectivity The 10/100Base-TX and 10/100/1000BASE-TX ports support auto-sensing, auto-negotiation Supports Jumbo frame up to 9KB Supports 32MB of packet buffer Supports up to 16K MAC address entries Flow Control supported Provides IEEE 802.3x for full duplex mode Back pressure flow control half duplex mode Provides store-and-forward forwarding scheme Provides HOL (Head of Line) blocking prevention Provides Broadcast storm protection Per port configuration based on rate control and limit VLANs support : Supports IEEE 802.3ac frame extension for VLAN tagging Supports IEEE 802.1Q VLAN Supports 256 VLANs entries, out of 4K VLAN ID Supports Port-based VLAN Supports Protocol-Based VLAN (IEEE 802.1v) Number of protocol VLAN entries is 7 per port VLAN grouped by frame type or protocol type Supports 3 protocol types as following: IP ARP RARP Supports 3 frame types as following: Ethernet type II LLC RFC 1042 frame Supports 802.1Q in 802.1Q double tagging (Phase 2) Private VLAN Supports GVRP protocol for dynamic VLAN management (number of VLANs 256) Supports IGMP snooping (v1/v2) Supports 64 groups (up to 255 groups phase 2), 32 router ports Supports IGMP v1/v2 querier Support Cisco-like IGMP Snooping MVR Spanning Tree: Provides Spanning Tree (IEEE 802.1D) Fast forwarding mode supported (Proprietary mechanism) IEEE 802.1w, Rapid Reconfiguration Spanning Tree IEEE 802.1s Multiple Spanning Tree supported up to 32 instance Provides Link Aggregation Complies to IEEE 802.3ad Cisco EtherChannel compatible Up to 6 trunk links group Up to 8 ports per trunk link group Supports unicast/multicast traffic balance over trunk ports Traffic balancing for unicast traffic is based on source/destination MAC address Traffic balancing for multicast traffic is based on destination MAC address Routing Features Provides IPv4 routing at wire speed Provides up to 4K IP address entries (Host Table) Provides up to 16K Routing Net Table Provides 256 static IP routes entries Supports up to 256 multicast groups Provides Multi-netting Up to 256 IP interface Provides Supernetting (CIDR) Provides RIP I (RFC1058) and RIP II (RFC2453) routing 16K Net entries Provides OSPF (RFC2328) routing up to 5 areas Provides IP Multicast Routing IGMP v1/v2 DVMRP (no tunnel) PIM - DM (Dense Mode) IP Redundancy - VRRP (RFC 2338) supported Equal Cost Multi-Path (ECMP) (Phase 2) Supports Hot Standby Routing Protocol (HRSP)(RFC 2281) ARP (RFC 826) Up to 8K entries Proxy ARP (RFC 1027) Quality of Service Features Provides 8-level priority in switching (IEEE 802.1p) Priority queue scheduling scheme: Weighted Round Robin (WRR) Strict Priority Per port bandwidth management Ingress and egress Fast Ethernet Port: Range 64Kbps ~ 100Mbps Resolution 64Kbps Gigabit Ethernet Port Range 1Mbps ~1000Mbps Resolution 1Mbps Traffic classification and priority management based on the following parameters: IEEE 802.1p (COS) IP Precedence (TOS) IP precedence based COS DSCP based COS TCP/UDP port based COS Provides DiffServ Security Features User/Password protected system management terminal (SNMP, Telnet, Web) Local Authentication up to 5 sets of user/password Remote Authentication via RADIUS/TACACS+ Static Port Security (MAC based) Support up to 1024 MAC entries per system/stack Supports up to 100 MAC entries per port IP filtering configuration for management interface (SNMP, Telnet, Web) L2/L3/L4 access control list 8 10/100Mbps ports as a group share 173 rules and 7 mask Gigabit port: per port up to 52 rules, 7 mask per port (Phase 2: 93 rules, 7 mask) Parameters are as following: MAC SA/DA VLAN based IP SA/DA Subnet based TCP/UDP port number RADIUS Authentication Multiple RADIUS Server: 2 servers Encryption: MD5 TACACS+ Authentication Encryption: MD5 Single Server Secure Shell (SSH v1/v2, secure Telnet session) HTTPS/SSL IEEE 802.1x port-based, MAC-based security (MAC-based Phase 2) Port-based: Single host mode: per port 1 MAC entries Multi-host mode: per port 1024 MAC entries Per system/stack 1024 MAC entries MAC-based: (Phase 2) Per system 512 entries The following supplicants are support: Win XP Win 2000 with SP4 Win 95/98 with AEGIS Email Alert (event type TBD) Management Features Provides 1 Male DB9 RS-232C console interface configured as DTE for operation, diagnostics, status, and configuration information Supports Cisco-liked Command Line Interface (CLI) for local console or remote telnet management using VT-100 style terminal, 4 sessions Supports Telnet management (4 sessions) Supports Embedded Web-based Management Supports software upgrade/download via XModem or TFTP Boot code upgrade/download via XModem only S/W upgrade/download during run time is via TFTP only Supports configuration download/upload via TFTP Supports dual copies of code Supports dual or more copies of configuration Supports BOOTP client for IP address assignment Supports Remote Ping Supports Port Mirroring: Across Stack Support up to 1 mirror sessions 1 mirrored port (TX) to 1 mirroring port 1 mirrored port (RX) to 1 mirroring port Provides DHCP Server(RFC 2131, 3046): 8 subnets, 512 entries/subnet Client Relay: 5 entries/VLAN Support UDP Helper DNS support Client Proxy: 2560 entries Supports Event/Error log Store to local flash: 4080 entries in 255Kbyte Flash Store to remote server via System Log (RFC3164) supports up to 5 servers Via SMTP (RFC 821) supports up to 3 servers The following faults are monitored: Thermal Monitor Fan fail Simple Network Time Protocol (SNTP, RFC2030) Supports SNMPv1/v2c/v3 v1: 5 SNMP community string, 5 trap receivers v2C: 5 SNMP community string, 5 trap receivers Supports RFC 2819 RMON group (1,2,3 & 9) Statistic: total 24 entries, average 1 entry per port History: total 24 entries, average 2 entries per port Alarm: total 24 entries Event: total 24 entries RMON configuration will not be save to flash rom. Support RMON II Group 16 (Phase 2) Supports MIBs IEEE 802.1 PAE MIB IEEE 802.3 LAG MIB IP Forward MIB (RFC 2096) OSPF MIB (RFC 1850) RMON MIB (RFC 2819) RMON 2 MIB (RFC 2021) RIP v2 MIB (RFC 1724) Bridge MIB (RFC 1493) P-Bridge MIB (RFC 2674P) Q-Bridge MIB (RFC 2674Q) V-Bridge MIB MAU MIB (RFC 2668) IF MIB (RFC 2863) DNS Reslover MIB (RFC 1612) Ether-Like MIB (RFC 2665) Entity MIB (RFC 2737) IP MIB (RFC 2011) TCP MIB (RFC 2012) UDP MIB (RFC 2013) VRRP MIB (RFC 2787) IPMROUTE STD MIB (RFC 2932) IGMP STD MIB (RFC 2933) PIM MIB (RFC 2934) PEA Equipment MIB SNMP v2 MIB (RFC 1907) SNMP FrameWork (RFC 3411) SNMP MPD MIB (RFC 3412) SNMP Target MIB (RFC 3413) SNMP Notify MIB (RFC 3413) SNMP User-Based SM MIB (RFC 3414) SNMP View-Based ACM MIB (RFC 3415) Private MIB Option Module       MGBIC-SX-P   MGBIC-LX-P 1000BASE-SX(LC Connector) Mini GBIC Module   1000BASE-LX(LC Connector) Mini GBIC Module Model SF-4024FL Access Method 10/100/1000Mbps ( CSMA/CD ) Supported Standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX and 100BASE-FX IEEE 802.3z 1000BASE-SX IEEE 802.3x flow control support IEEE 802.1D (Bridging), 1993 IEEE 802.1Q (Virtual LAN) 1998 IEEE 802.3ad (LACP) IEEE 802.1s IEEE 802.1w Supported Media UTP/STP Cable 10Mbps :Category 3 or greater 100Mbps :Category 5 or greater 1000Mbps :Enhanced Category 5 or greater Port Configuration 10 / 100 BASE-T ports × 24 SFP Gigabit ports × 2 10 /100/1000 BASE-T RJ45 ports × 2 1 RS232 port × 1 1 Redundant Power (DC) connector × 1 Data Transfer mode Store-and-forward Filtering/Forwarding Rate For each port, 10M:14,881pps 100M:148,810pps 1000M:1,488,100pps Management .Provides 1 Male DB9 RS-232C console interface configured as DTE for operation, diagnostics, status, and configuration information. .Supports Cisco-liked Command Line Interface (CLI) for local console or remote telnet management using VT-100 style terminal, 4 sessions .Supports Telnet management (4 sessions) .Supports Embedded Web-based Management .Supports software upgrade/download via XModem or TFTP .Supports configuration download/upload via TFTP .Supports dual copies of code .Supports dual or more copies of configuration .Supports BOOTP client for IP address assignment .Supports Remote Ping . Supports Port Mirroring: .Provides DHCP .Support UDP Helper .DNS support .Supports Event/Error log .Simple Network Time Protocol (SNTP, RFC2030) .Supports SNMPv1/v2c/v3 .Supports RFC 2819 RMON group (1,2,3 & 9) .Support RMON II Group 16 (Phase 2) .Supports MIBs Flow Control Full Duplex: IEEE802.3X Half Duplex: Back Pressure Security Features User/Password protected system management terminal (SNMP, Telnet, Web) Static Port Security (MAC based) IP filtering configuration for management interface (SNMP, Telnet, Web) L2/L3/L4 access control list RADIUS Authentication TACACS+ Authentication Secure Shell (SSH v1/v2, secure Telnet session) HTTPS/SSL IEEE 802.1x port-based, MAC-based security (MAC-based Phase 2) Email Alert (event type TBD) IP Multicast Support IGMP snooping Jumbo frame Supports Jumbo frame up to 9KB MAC Address 16,000 entries Buffer Memory 32 MB Internal Bus Speed 8.8 Gbps VLAN IEEE802.1Q Tagging VLAN ( up to 255 groups ) Trunk Supports 8-port, ( up to 6 groups ) QoS IEEE802.1p ( 8 levels ) Port Mirroring Supported MAC address filtering Supported ACL (Access Control List) Supported Power Supply Nominal Input Voltages: 100V & 240V Input Frequency: 50/60Hz Redundant Power Supported Operating Temperature 0 to 50 ° Operating Humidity 5% to 95% (Non-condensing) Storage temperature -40 to 70 ° Dimension (H x W x D): 4.4cm x 44cm x 23cm Weight 4.36kg 19" rack-mounting Supported EMI FCC Class A, CE Mark , VCCI Package Contents - SF-4024FL - Four adhesive foot pads - Bracket Mounting Kit containing two brackets and eight screws for attaching the brackets to the switch - Power Cord - RS-232 console cable - This Installation Guide - Management Guide
	| Site Map | Terms of Use | Privacy | Contact Us |