It equipped with 300Mbps PoE receiving function Without LAN access point
|
| |
|
|
This product is corresponding to PoE receiving function!
Both communication and power get through a LAN cable to supply power if PoE switch or PoE power adapter connected. It’s better to fit the LAN cable to the ceiling where the power supply is in difficulty.
- PoE (Power over Ethernet) refers to power-supply specification of active power-supply network.
- PoE specification, connected with this product, is IEE802.3af (48v).
This product is corresponding to AC adapter receiving!
This product is corresponding to PoE receiving, as well as AC adapter receiving. Receiving method can be determined according to the surroundings of setting location.
There is no need to build power engineering! Saving setting cost
 If the cable is single line with little loss of signal transmission, this product corresponds to PoE receiving from 1 meter without needing to build power engineering. Saving setting cost. There is no need to build power engineering largely, just a few minor setups. IEEE802.11n/b/g
It is compatible with IEEE 802.11n and 300Mbps (theoretical value) is possible.
Also wireless LAN standard IEEE802.11/b/g is supported.
- In order to communicate with IEEE802.11n spec., the device connected to needs to be a IEEE802.11n supported.
Wireless Interactive network between different makers is guaranteed. (Wi-Fi certificate acquired)
 Guarantee for communication without problems between productions we procured ourselves with a WiFi certification by which a smooth communication between products from different manufactures is guaranteed. It’s a certification under strict conditions by issued by WiFi Alliance for passing the transmission test. The logo guarantees the correct connection between products from different manufactures. RoHS correspondence
Throughout the life cycle of this product, from production to scrap, this product supports RoHS, which is to limit the usage of harmful substances such as lead, cadmium, liquid silver, hexavalent chrome, polybrominated biphenyl, Polybrominated diphenyl ether.
|
| Model number |
EQN-AP300E |
| Wireless specs |
| Support Format |
IEEE802.11n, IEEE802.11g, IEEE802.11b |
| Channel / Frequency |
US, Canada, Taiwan : 11 (Auto, 1~11ch) / 2,412~2,462MHz
UK, EU, Hong Kong : 13 (Auto, 1~13ch) / 2,412~2,472MHz |
| Frequency band |
2.4GHz(2,412～2,472MHz) |
| Network Speed |
IEEE802.11n：Up to 300Mbps(40MHz), Up to 150Mbps(20MHz)
IEEE802.11g：54, 48, 36, 24, 18, 12, 9, 6Mbps, Auto
IEEE802.11b：11, 5.5, 2, 1Mbps, Auto |
| Transfer Mode |
IEEE802.11n : Orthogonal Frequency Division Multiplexing (OFDM)
IEEE802.11g : Orthogonal Frequency Division Multiplexing (OFDM)
IEEE802.11b : Direct sequence spread spectrum (DSSS) |
| Antenna |
Internal Antenna |
| Security |
WEP(64/128bit)
WPA-PSK(TKIP/AES)
WPA2-PSK(TKIP/AES)
Hidden SSID(Enable/Disable)
MAC Address Filtering/Max.64 entry |
| Easy Wireless Setup |
WPS(PBC/PIN) |
| Energy conservation setting |
Power save, Schedule management |
| Wired Part specs |
| Support Format |
IEEE802.3(10BASE-T), IEEE802.3u(100BASE-TX) |
| Interface |
RJ45 port×1 (AutoMDI/MDI-X) |
| Transfer Speed |
10/100Mbps(Auto Negotiation) |
| Network Cable |
10BASE-T : Category 3 or above
100BASE-TX : Category 5 or above |
| Software specs |
| Operational mode |
Access point mode
WDS bridge mode
Universal repeater mode(Extender) |
| Time setting |
NTP Server |
| Log Function |
Event log |
| Other functions |
LED control, Transmission rate graph, Network diagnosis |
| Hardware specs |
| Switch |
Reset button |
| LED |
Power, Ethernet, Wireless |
| Power Source |
DC 12V/1A |
| Power Consumption |
Max. 400mA |
| PoE |
PoE(IEEE802.3af) 48VDC/0.375A |
| Outside Dimension |
Approx 50（H）×120(D) mm |
| Weight |
Approx 280g（Main unit only） |
| Operation Environment |
Temperature:0～45℃
Humidity:5～95% (no condensation) |
| Other |
| AC adaptor |
input：AC100-240V, 50/60Hz, 0.3A
output：DC12.0V, 1.0A |
| Supported OS |
Windows 7(32/64bit) / Vista(32/64bit) / XP
Mac OS X 10.6 / 10.5 / 10.4 |
| Various Setting |
WEB browser |
- If you use a browser other than fully supported browser Internet Explorer 7.0, you might not be able to setup your router correctly.
- In order to use WPS, the wireless LAN device you connect to needs to be WPS supported.
- The speed is the maximum theoretical value under the wireless LAN standard; it does not represent an actual data transfer-speed.
- If you use WEP or TKIP for security setting, the transmission speed may be slower than IEEE802.11n.
- These specs will be changed without notice.
|
|
|
Location : 
