Location : Home > Support
- WDS Compatible Information -
 
What is WDS ? | Supported Products

Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does. To do this, you must set these APs in the same channel and set MAC address of other APs which you want to communicate with in the table and then enable the WDS.

  • Bridge (WDS):Connecting two APs wirelessly, to expand the range of the network.
  • Repeater (WDS):Connecting several APs (Routers) up to four wirelessly, to expand the scope of the wireless network
 
Update Date : 02.20.2008
Model Picture Product Name Repeater Bridge
BLW-54CW3
IEEE802.11g 54Mbps Wireless Broadband Router O O
IEEE802.11g Wireless 54Mbps Multi-Function Broadband Router O O
High Power MIMO
USB2.0 Supported
Wireless Downloading Router
O O
BitTorrent Wireless Download Router X X
Industrial PoE Wireless-G AP/Bridge O O
2.4 GHz IEEE 802.11g 54Mbps Wireless Hot Spot X O
IEEE 802.11g 54Mbps High Power 2LAN POE Access Point (LAN2 Support POE) O O
2.4 GHz IEEE 802.11g 54Mbps Wireless LAN 2-Way Access Point O O
IEEE802.11N Wireless Giga USB Broadband Router O O
Draft IEEE802.11n Wireless Broadband Router O O
IEEE802.11N Wireless USB Broadband Router O O
SMB Wireless Switch _ Wireless Access COMBO Controller O O
 
© 2008 Planex Communications Inc. All rights reserved. About PCI | Contact Us | Site Map